Wildlife Kamera

720p@30fps | IP68 | Schwarz No-Glow IR | Nachtsicht | Blickwinkel: 55 ° | Bewegungssensor | Erfassungswinkel: 55 ° | Erfassungsbereich: 25 m | Monitorgröße: 5 " | LCD Screen | Mehrfarbig

Funktionen

Hersteller Artikelnummer: WCAM22GN
EAN-Nummer: 5412810274321
• 12 MP Auflösung für hervorragende Bildqualität
• Videoauflösung in 1280x720
• Integriertes LCD-Display + Steuerungen für hervorragende Benutzerfreundlichkeit
• Aufnahme von Video und Ton
Befestigen Sie diese Wildkamera an einem Baum und erhalten Sie so Nahvideoaufnahmen von Tieren in der Wildnis. Die Kamera verfügt über Nachtsicht und eine extrem kurze Auslösezeit, sodass Sie keine besonderen Momente mehr verpassen.

Verpackung

Verpackungsinhalt

Digital camera
USB cable
Mounting strap
Quick start guide

Maße Verkaufsverpackung Geschenkbox

Breite Höhe Länge
110 mm 168 mm 84 mm

Logistikmaße

Gepackt zu Breite Höhe Länge Gewicht
1 110 mm 168 mm 84 mm 440 g
20 565 mm 345 mm 205 mm 9700 g

Produkteigenschaften

Breite 95 mm
Höhe 130 mm
Tiefe 50 mm
Gewicht 317 g
Material ABS
Videoformat MP4
Art externer Speicherplatz MicroSD
Zeitrafferfunktion Ja
Bewegungssensor Ja
Stoßfest Ja
Infrarot-Typ Schwarz No-Glow IR
Anzeige LCD Screen
Kameratyp Wildlife Kamera
Bildformate JPEG
Maximal unterstützte Speicherkartenkapazität 32 GB (Nicht enthalten)
Max. Videoauflösung 720p@30fps
Eingangsspannung N/A
Stromquellentyp Batteriebetrieben
Nachtsicht Ja
Unterstützt Fotoauflösung 12.0 MPixel
IP-Schutzart IP68
Farbe Mehrfarbig
Monitorgröße 5 "
Auslösezeit 5 s
Videolänge 50 s
Erfassungswinkel 55 °
Erfassungsbereich 25 m
Blickwinkel 55 °
Anzahl der LED's 20 LED's
erfoderliche Batterien ( nicht enthalten) 8x AAA/LR03

Support

Häufig gestellte Fragen


Dies ist vollkommen normal. Bei dem Plastikring handelt es sich um eine Filterscheibe, die sich vor oder neben die Linse schiebt.
Bei eingeschalteter Kamera schiebt sich die Filterscheibe je nach aktuellen Lichtverhältnissen automatisch vor die Linse.
Wenn die Kamera ausgeschaltet ist, ist die Filterscheibe frei bewegbar und kann sich in eine Zwischenstellung vor das Objektiv schieben. Sobald die Kamera aber aktiviert wird, fährt die Filterscheibe an ihren vorgesehenen Platz.

Wir haben die folgenden Fragen auf Englisch für Sie gefunden

Set the switch to setup
press menu.
Use up and down to scroll through the main menu.
Press ok to enter a certain menu.
Use left and right to change the value of the particular option.

This option allows you to give a camera aunique name so you can keep multiple camera's apart.

- Set the switch to setup (middle position)
- Press menu
- Use up and down to go to camera mode
- use left and right to change it to video if needed.
- Press down to set the clock. press enter to go into the date and time menu.
- Exit this menu and go to video size and select the resolution you want (1280x720 is the highest resolution)
- The next option is the video length. How long do you want it to record after a detection.
- Timelapse is an option that will have the camera take picture every 5 minutes (or 10, 15, 20 etc) and then stitches it into a video.
- PIR trigger: here you can set the sensitivity of the motion detection.
- PIR interval sets how often you want to scan with motion detection.
- Camera position is only a tag you can give your camera if you have more than one camera (camera 1 , camera 2 etc)

Difference between photo sizes: the resolution of the photo or video

Taking multiple photo's in rapid succession

Lower resolution means lower quality but you can store more video on your memory card, We recommend 1280x720 for best results

PIR is the motion detection. Turn it on to make the camera record when it sees motion

mode is photo or video (do you want it to record a photo, video or both?)

This is for manual recording. typically this is not used.

to turn the camera on and off

that's up to you. there is no right or wrong.

timelapse is a mode that takes pictures at certain intervals. Afterwards you can play this as a video. it looks like it is fast forwarded.

high is sensitive: it will respond to smaller movements.

how often do you want it to scan for movement.

It's the name of the camera, it is easier to keep multiple camera's apart.

Sometimes the IR filter is in front of the lens, when the camera is turned off. The camera is not faulty. When the camera is on, it will fix itself to the right place in front of the lens.

Zeige alle Produkte in: