SmartLife Sisäkamera

Wi-Fi | HD 720p | Kääntö/kallistus | MicroSD (ei sisälly) / Pilvipalvelutallennus (valinnainen) | Liiketunnistimella | Yökuvaus | Harmaa / Valkoinen

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

You can add maximum 20 members.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.