Kaapelit ja adapterit/Energia/Pistokkeet

SmartLife Älypistorasia

Wi-Fi | 2500 W | Maadoitettu virtaliitin / Tyyppi F (CEE 7/7) | -10 - 45 °C | Android™ / IOS | Valkoinen | 1 kpl

Ominaisuudet

Valmistajan koodi: WIFIP130FWT
EAN: 5412810293971
• Helppo asentaa - voidaan yhdistää suoraan Wi-Fi-verkkoon
• Voidaan käyttää erillisenä tuotteena tai yhdistää helposti muihin Nedis® SmartLife -tuotteisiin
• Mahdollistaa etähallinnan ja automaattisen ohjauksen laitteiden ajastusta ja yhdistämistä varten
• Tukee ääniohjausta Amazon Alexa- tai Google Home -järjestelmien kautta
Hallitse useita sähkölaitteita etätoiminnolla liittämällä ne langattomaan älypistokkeeseen ja yhdistämällä ne älypuhelimeesi tai tablettiisi Wi-Fi-reitittimen kautta.

Helppo asentaa
Sinun ei tarvitse olla tekniikkanero eikä sähköasentaja, että voit ohjata ja automatisoida kodin sähkölaitteita. Tarvitset vain älypistokkeen ja Wi-Fi-reitittimen. Intuitiivisen sovelluksemme avulla voit kytkeä ja katkaista koneiden virran etätoiminnolla ja automaattisesti. Sitä voi käyttää myös ääniohjausjärjestelmien, kuten Amazon Alexan tai Google Homen kanssa.

Ajasta ja yhdistä
Ajasta pistoke kytkemään laitteet päälle tai yhdistä ne muihin, jotta voit luoda ympäristölle asetuksia, jotka voidaan ottaa käyttöön yhdellä komennolla tai napin painalluksella.

Nedis SmartLife
Löydä laaja ja alati kasvava valikoima tuotteita, kuten polttimoita, katkaisijoita, pistorasioita, antureita ja kameroita, joita voi ohjata helppokäyttöisellä ja intuitiivisella sovelluksella. Koska ääniohjaus tukee Amazon Alexa- ja Google Home -järjestelmiä, etkä tarvitse muuta kuin nykyisen Wi-Fi-verkkosi, saat yhdistetyn älykodin helposti.
Etsitpä sitten yksittäistä älypolttimoa tai -pistorasiaa tai haluat automatisoida koko kotisi, tutustu siihen, kuinka helposti saatavilla älyteknologia on nykyään.

Pakkaus

Pakkaussisältö

Älypistoke
Pika-aloitusopas

Jälleenmyyntipakkauksen mitat Lahjapakkaus lukituksella

Leveys Korkeus Pituus
65 mm 125 mm 105 mm

Logistiset mitat

Pakattu per Leveys Korkeus Pituus Paino
1 65 mm 155 mm 110 mm 154 g
40 340 mm 290 mm 440 mm 6960 g

Tuotteen tekniset tiedot

Leveys 60 mm
Korkeus 54 mm
Syvyys 60 mm
Paino 96 g
Väri Valkoinen
Maksimi lähetysantennin vahvistus 0 dBi
Materiaali Muovi
Sopii käytettäväksi Nedis® SmartLife
Maksimi lähetysteho 15 dBm
Lähtöteho 2500 W
Tulovirta 10 A
Sovellus saatavana kohteeseen Android™
IOS
Lähetystaajuuden alue 2412 - 2472 MHz
Virtapistoke Tyyppi F (CEE 7/7)
Pakkauksessa olevien tuotteiden määrä 1 kpl
Pakkaustyyppi Gift Box with Euro Lock
Tuettu langaton tekniikka Wi-Fi
Laitteen lähtövirran liittimet Maadoitettu virtaliitin / Tyyppi F (CEE 7/7)
Maadoituksen tyyppi Maadoitettu virtaliitin
Laitteen tulovirran liittimet Maadoitettu virtaliitin / Tyyppi F (CEE 7/7)
Toimintalämpötila-alue -10 - 45 °C
Tulojännite 230 V AC

Tuki

Usein kysytyt kysymykset

Olemme löytäneet seuraavat kysymykset englanniksi

To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.

1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.

Now, you can control your devices by Google home products.


Add the "Smart Life" service to Google Home (no Nedis in the name).

Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.

Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.

Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.

Please try the AP mode.

Make sure that you use a 2.4Ghz wifi network.

Reset the plug so it blinks slow.

If it blinks fast, reset it again and it will blink slowly



In the app:

+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.



Hold your phone very close to the plug during the installation

This method uses a direct connection to the device to send the info of your wifi to it.

Holding it close optimises this connection

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

You can add maximum 20 members.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.