Kaapelit ja adapterit/Energia/Seinäkytkimet

SmartLife Seinäkytkin

Wi-Fi | kaksois | Seinäkiinnitys | 1000 W | Android™ / IOS | Lasi | Valkoinen

Ominaisuudet

Valmistajan koodi: WIFIWS20WT
EAN: 5412810271788
• Käytä kahden valon langatonta etähallintaa huoneessa yhdellä älykkäällä seinäkytkimellä
• Kestävä - yli 100 000 kytkentäkerran käyttöikä
• Huomaamaton - sulautuu huoneen sisustukseen
• Tehokas - voit ajastaa valaistuksen, yhdistää muihin laitteisiin ja ohjata äänellä (kun käytössä on Amazon Alexa tai Google Home)
• Monipuolinen - voidaan käyttää paikallisesti tavallisena valokatkaisimena tai etätoiminnolla ja automaattisesti
Tavallisista valokytkimistä tuli juuri entistä älykkäämpiä. Tällä älykkäällä kahden valon seinäkytkimellä voit hallita kahta valoa etätoiminnolla ja automaattisesti samalla huomaamattomalla seinäkytkimellä.

Helppo asentaa
Valoja voi hallita helposti kytkimen kosketuspainikkeiden avulla. Kytkimen avulla voit myös luoda yhteyden suoraan Wi-Fi-reitittimeesi ja hallita kahta valoa älypuhelimella ja tabletilla tai äänellä, kun käytössä on Amazon Alexa tai Google Home.
Huomautus: Neutraali johto tarvitaan aina virta kytkin 230 Volttia

Ajasta ja yhdistä
Sovelluksella, joka toimii kahden valon älykkään seinäkytkimen aivoina, voit yhdistää kytkimen suoraan Wi-Fi-reitittimeesi ilman erillistä keskitintä. Sen avulla voit yhdistää haluamasi valot muihin laitteisiin ja luoda huoneeseen täydellisen tunnelman yhdellä komennolla. Voit myös määrittää valot syttymään automaattisesti - ihanteellinen ratkaisu, jos olet muutaman päivän poissa kotoa.

Huomaamaton
Kytkimen virtaviivainen ja helposti puhdistettava lasipinta sulautuu sisustukseen, ja huomaamaton yksikkö on riittävän tehokas tukemaan sähkövaloja 300 wattiin saakka.

Nedis SmartLife
Löydä laaja ja alati kasvava valikoima tuotteita, kuten polttimoita, katkaisijoita, pistorasioita, antureita ja kameroita, joita voi ohjata helppokäyttöisellä ja intuitiivisella sovelluksella. Koska ääniohjaus tukee Amazon Alexa- ja Google Home -järjestelmiä, etkä tarvitse muuta kuin nykyisen Wi-Fi-verkkosi, saat yhdistetyn älykodin helposti.
Etsitpä sitten yksittäistä älypolttimoa tai -pistorasiaa tai haluat automatisoida koko kotisi, tutustu siihen, kuinka helposti saatavilla älyteknologia on nykyään.

Pakkaus

Pakkaussisältö

Älykäs Kaksoisseinäkytkin
Pika-aloitusopas

Jälleenmyyntipakkauksen mitat Lahjapakkaus lukituksella

Leveys Korkeus Pituus
50 mm 125 mm 105 mm

Logistiset mitat

Pakattu per Leveys Korkeus Pituus Paino
1 55 mm 155 mm 110 mm 180 g
50 280 mm 280 mm 550 mm 9880 g

Tuotteen tekniset tiedot

Leveys 83 mm
Korkeus 35 mm
Syvyys 85 mm
Paino 136 g
Väri Valkoinen
Merkkivalo Kyllä
Virtalähteen tyyppi Verkkovirtakäyttöinen
Sopii käytettäväksi Nedis® SmartLife
Maksimi lähetysantennin vahvistus 2 dBi
Tulovirta 10 A
Materiaali Lasi
Lähtöteho 1000 W
Sovellus saatavana kohteeseen Android™
IOS
Maksimi lähetysteho 19 dBm
Sisäinen syvyys 26 mm
Asennuslevyn reikäväli 60 mm
Asennus Seinäkiinnitys
Maksimi virrankulutus 0.3 W
Lähtövirta 4 A
Tulojännite 100 - 240 V AC 50 Hz
Pakkauksessa olevien tuotteiden määrä 1 kpl
Tuettu langaton tekniikka Wi-Fi
Laitteen lähtövirran liittimet kaksois
Toimintalämpötila-alue -10 - 45 °C
Lähetystaajuuden alue 2412 - 2462 MHz

Tuki

Usein kysytyt kysymykset

Olemme löytäneet seuraavat kysymykset englanniksi

Om de wifi slimme schakelaar te laten werken heeft u een neutraal nodig in de inbouwdoos. Dit zijn we in Nederland niet gewend.
Om dit snel en makkelijk op te lossen raden wij u aan, om aan de bestaande zwarte draad bij uw lamp of gordijn een nieuwe zwarte draad en nieuwe blauwe draad te plakken en deze via uw inbouwdoos door te trekken.

De nieuwe blauwe draad sluit u aan op de bestaande blauwe draad bij uw lamp aansluitpunt en op de "N" van uw slimme schakelaar.

No, this is not a dimmer.
You can program the button(s) so it will set a Nedis Smartlife bulb to a certain brightness.
The brightness of regular lighs can't be changed, you can only turn it on or off with the app or voice assistants.

You need a neutral wire at your switch connection point.
So you need a blue , brown and black wire in your connection point.

If you have no blue wire (neutral) you have to make this.

We advise you to use the existing black wire, tape a blue and a new black wire to the existing black wire and pull the wires towards your lamp. Connect the new blue wire to the existing blue wire and reconnect the black wire.

To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.

1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.

Now, you can control your devices by Google home products.


Add the "Smart Life" service to Google Home (no Nedis in the name).

Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.

Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

You can add maximum 20 members.

Install the device(s) in the Nedis SmartLife app.
Then import the app "Smart Life' into Google Home or Alexa.
All devices will now be visible in Google Home or Alexa and can be used.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.