Yleiskaukosäädin
Esiohjelmoitu | 10 Laitetta | Muistipainikkeet / TV-opas painike | Infrapuna | Musta
Ominaisuudet
• Plug and play
Kaukosäädin muistaa tallennetut laitteet 20 minuutin ajan, joten sitä ei tarvitse ohjelmoida uudelleen paristojen vaihdon jälkeen.
Pakkaus
Pakkaussisältö
Remote control
Manual
Jälleenmyyntipakkauksen mitat Myyntipakkaus
Leveys | Korkeus | Pituus |
---|---|---|
240 mm | 240 mm | 40 mm |
Logistiset mitat
Pakattu per | Leveys | Korkeus | Pituus | Paino |
---|---|---|---|---|
1 | 170 mm | 248 mm | 40 mm | 131 g |
100 | 485 mm | 270 mm | 610 mm | 14220 g |
Tuotteen tekniset tiedot
Leveys |
200 mm |
Korkeus |
50 mm |
Syvyys |
30 mm |
Paino |
74 g |
Väri |
Musta |
Materiaali |
ABS-Muovi Kumi |
Virtalähteen tyyppi |
Paristokäyttöinen |
Tulojännite |
3 V DC |
Akun tyyppi |
AAA |
Lähetystekniikka |
Infrapuna |
Sopivat laitteet |
TV DVB-S / S2 vastaanotin Multimedia |
Kaukosäätimen tyyppi |
Yleismalli |
Koodin syöttö |
Esiohjelmoitu |
Kaukosäätimen ominaisuudet |
TV-opas painike Muistipainikkeet |
Vaatii paristot (ei sisälly) |
2x AAA/LR03 |
Laitteiden lukumäärä |
10 Laitetta |
Tuki
Usein kysytyt kysymykset
Olemme löytäneet seuraavat kysymykset englanniksi
I can't find a working code for my device.
Use the automatic search to find a working code.
1. Switch on the home appliance you wish to control. Place the remote control directly
at the home appliance, for example your TV.
2. Press and hold the “TV” button; the indicator light will light up.
3. Press and hold the “Volume+” and “Channel+” buttons at the same time until the
indicator light lights up. Then release both buttons (the indicator light will switch off
and then on again).
4. Press and hold the “POWER” button until the TV set is switched off. Release the
“POWER” button immediately.
5. Check if the other buttons operate correctly. If this is the case, the setting was
successful. If the buttons do not function correctly, please repeat steps 2 to 5 until
you have found the right code.