Telecomando universale
Preprogrammato | 10 Dispositivi | Pulsanti di memoria / Tasto guida TV | Infrarossi | Nero
Funzioni
• Plug and play
Se le batterie vengono sostituite entro 20 minuti, il telecomando non deve essere riprogrammato poiché i dispositivi memorizzati rimangono nella memoria del telecomando per max. 20 minuti.
Imballaggio
Contenuto della confezione
Remote control
Manual
Dimensioni e peso del prodotto Blister
Larghezza | Altezza | Lunghezza |
---|---|---|
240 mm | 240 mm | 40 mm |
Dimensioni e peso della confezione
Confezioni da | Larghezza | Altezza | Lunghezza | Peso |
---|---|---|---|---|
1 | 170 mm | 248 mm | 40 mm | 131 g |
100 | 485 mm | 270 mm | 610 mm | 14220 g |
Specifiche del prodotto
Larghezza |
200 mm |
Altezza |
50 mm |
Profondità |
30 mm |
Peso |
74 g |
Colore |
Nero |
Materiali |
ABS Gomma |
Tipo di alimentazione |
Alimentazione a batteria |
Tipo di energia della batteria |
AAA |
Tecnologia di trasmissione |
Infrarossi |
Dispositivi adatti |
TV Ricevitore DVB-S / S2 Multimedia |
Tipo remoto |
Universale |
Immissione codice |
Preprogrammato |
Funzionalità di controllo remoto |
Tasto guida TV Pulsanti di memoria |
Tensione d'entrata |
3 V DC |
Batterie richieste (non incluse) |
2x AAA/LR03 |
Numero di dispositivi |
10 Dispositivi |
Supporto
Domande frequenti
Abbiamo trovato le seguenti domande per te in inglese
I can't find a working code for my device.
Use the automatic search to find a working code.
1. Switch on the home appliance you wish to control. Place the remote control directly
at the home appliance, for example your TV.
2. Press and hold the “TV” button; the indicator light will light up.
3. Press and hold the “Volume+” and “Channel+” buttons at the same time until the
indicator light lights up. Then release both buttons (the indicator light will switch off
and then on again).
4. Press and hold the “POWER” button until the TV set is switched off. Release the
“POWER” button immediately.
5. Check if the other buttons operate correctly. If this is the case, the setting was
successful. If the buttons do not function correctly, please repeat steps 2 to 5 until
you have found the right code.