Veiligheid en Beveiliging/Deurbellen/Videodeurbellen

SmartLife Videodeurbel

Wi-Fi | Batterij Gevoed | Full HD 1080p | Cloud Opslag (optioneel) / microSD (niet inbegrepen) | IP54 | Met bewegingssensor | Nachtzicht | Grijs

Kenmerken

Origineelnummer leverancier: WIFICDP20GY
EAN nummer: 5412810330287
• Stuurt pushberichten naar je smartphone als er iemand de voordeur nadert (bewegingsdetectie) of aanbelt
• Werkt op batterijen en is dus een 100% draadloze videodeurbel
• Bewegingsdetectie kan ook worden uitgezet (bijv. als de voordeur direct aan de straat grenst)
• 2-zijdige communicatie om met je bezoeker te spreken, waar je zelf ook bent
• Full HD-opnames (1080p) en digitaal inzoomen op je smartphone voor een gedetailleerd beeld
• Opnames worden opgeslagen op een microSD-kaart tot 128 GB (niet inbegrepen) - kijk terug wat er is gebeurd
• Geïntegreerd in de Nedis® SmartLife-app
• Uit te breiden met de draadloze deurbelontvanger (WIFICDPC10BK - niet inbegrepen), zodat je de deurbel hoort als je zelf thuis bent, ongeacht waar je telefoon ligt
Met deze Nedis SmartLife videodeurbel weet je altijd dat er iemand aan de deur staat, waar je zelf ook bent. Zodra je bezoek aanbelt of, dankzij bewegingsdetectie, zelfs maar de voordeur nadert, ontvang je een pushbericht op je smartphone. Je kunt vervolgens een videogesprek starten. Vraag bijvoorbeeld de koerier het pakketje bij de buren af te leveren of meld die verkoper dat je geen interesse hebt - en dat alles zonder de deur te openen.

Gezien je van waar ook ter wereld kunt reageren als je smartphone internetverbinding heeft, vergroot deze videodeurbel tevens je woonveiligheid, omdat het lijkt of je thuis bent.

De Full HD-camera (1080p) heeft een kijkhoek van 180° en ondersteunt nachtzicht, waardoor je 24 uur per dag duidelijk kunt zien wie er aan de deur staat.

En maak je geen zorgen als je geen tijd hebt om open te doen. De beelden worden op een microSD-kaart opgeslagen, zodat je ze altijd kunt terugkijken.

Deze draadloze videodeurbel is eenvoudig te installeren met enkel een Wi-Fi verbinding. Breid deze videodeurbel uit met onze Nedis deurbel-ontvanger (WIFICDPC10BK) om ook de bel te horen als je smartphone uit staat.

Verpakking

Inhoud verpakking

Videodeurbel
Muurbeugel
USB kabel
Bevestigingsmaterialen
Snelstartgids

Verpakingsmaat Cadeaubox met eurolock

Breedte Hoogte Lengte
162 mm 95 mm 100 mm

Logistieke afmetingen

Verpakt per Breedte Hoogte Lengte Gewicht
1 105 mm 120 mm 165 mm 377 g
10 335 mm 120 mm 495 mm 4100 g
20 355 mm 265 mm 510 mm 8860 g

Productspecificaties

Breedte 50 mm
Hoogte 141 mm
Diepte 33 mm
Gewicht 225 g
Apparaat stroominput Micro-USB
Ingangsstroom 1.0 A
Type stroombron Batterij Gevoed
Stroomkabel zijde B Micro-USB
Stroomkabel zijde A USB
Kleur Grijs
Materiaal Kunststof
Functionaliteit voor cloud opslag Ja
Nachtzicht 5 m
Geschikt voor Nedis® SmartLife
LED 1
Ingangsvoltage 5 V DC
Maximale antenne versterking 2 dBi
Maximale resolutie Full HD 1080p
Met bewegingssensor Ja
Accessoires Installatiemateriaal
Vereiste batterijen (meegeleverd) 2x 18650
App beschikbaar voor Android™
IOS
Beeld Chip 1/2.9” CMOS
Zendfrequentie 2412 - 2472 MHz
Maximale stroomverbruik 2 W
Batterij capaciteit 5200 mAh
Type opslag microSD (niet inbegrepen)
Cloud Opslag (optioneel)
Maximaal zendvermogen 13 dBm
IP-codering IP54
Kijkhoek 180 °
Lens 1.4 mm
Ondersteunde draadloze technologie Wi-Fi
Aantal melodieën 1 Melodie
Bedrijfstemperatuurbereik -20 - 50 °C
Aantal producten in verpakking 1 Stuks
Max. batterijduur 4 Maanden

Ondersteuning

Veel gestelde vragen

Wij hebben voor u de volgende vragen gevonden in het Engels

1. Place the gong as close to the doorbell as possible during the installation.
2. Press and hold the button on the chime for 5 seconds , led on the chime flashes.
3. Shortly press chime reset button. The led will start blinking slowly.
4. Hold doorbell button until the Led on the chime stops flashing
5. Push the doorbell button to test it
6. Relocate the chime to the desired location
7. Push doorbell again to test the range

Unfortunately this battery powered doorbell does not have this option.
The wired WIFICDP10GY doorbell does allow you to change the tone and volume.

Unfortunately the manual that comes with the doorbell is incorrect.
We were too late to change it when we found out but we did add a small extra manual on how to pair the gong.

Move the gong as close to the doorbell as possible.
Give the gong's button a short press: the LED starts to blink
Now press and hold the doorbell's button until the LED on the gong stops blinking and it is paired.

It is not possible to change the tone and volume on this doorbell model.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.