Universele Afstandsbediening

Voorgeprogrammeerd | 10 Apparaten | Geheugenknoppen / TV-gids Knop | Infrarood | Zwart

Kenmerken

Origineelnummer leverancier: TVRC2100BK
EAN nummer: 5412810292578
• Eenvoudige installatie
• Plug-and-play
10-in-1 voorgeprogrammeerde afstandsbediening, geschikt voor meer dan 250 merken, waaronder de belangrijkste. De afstandsbediening is compatibel met: TV/CTV/VCR/DBS/SAT/CBL/HiFi/CD/LD/VCD/DVD.

Als de batterijen binnen 20 minuten worden vervangen, hoeft de afstandsbediening niet opnieuw te worden geprogrammeerd, want de opgeslagen gegevens blijven ca. 20 minuten bewaard.

Verpakking

Inhoud verpakking

Remote control
Manual

Verpakingsmaat Blister

Breedte Hoogte Lengte
240 mm 240 mm 40 mm

Logistieke afmetingen

Verpakt per Breedte Hoogte Lengte Gewicht
1 170 mm 248 mm 40 mm 131 g
100 485 mm 270 mm 610 mm 14220 g

Productspecificaties

Breedte 200 mm
Hoogte 50 mm
Diepte 30 mm
Gewicht 74 g
Kleur Zwart
Materiaal ABS
Rubberen
Type stroombron Batterij Gevoed
Ingangsvoltage 3 V DC
Batterijtype AAA
Transmissietechnologie Infrarood
Geschikte apparaten TV
DVB-S / S2-ontvanger
Multimedia
Type afstandsbediening Universeel
Code Invoer Voorgeprogrammeerd
Functies van de afstandsbediening TV-gids Knop
Geheugenknoppen
Vereiste batterijen (niet meegeleverd) 2x AAA/LR03
Aantal apparaten 10 Apparaten

Ondersteuning

Veel gestelde vragen

Wij hebben voor u de volgende vragen gevonden in het Engels

Use the automatic search to find a working code.

1. Switch on the home appliance you wish to control. Place the remote control directly
at the home appliance, for example your TV.
2. Press and hold the “TV” button; the indicator light will light up.
3. Press and hold the “Volume+” and “Channel+” buttons at the same time until the
indicator light lights up. Then release both buttons (the indicator light will switch off
and then on again).
4. Press and hold the “POWER” button until the TV set is switched off. Release the
“POWER” button immediately.
5. Check if the other buttons operate correctly. If this is the case, the setting was
successful. If the buttons do not function correctly, please repeat steps 2 to 5 until
you have found the right code.

Laat artikelen zien in: