Veiligheid en Beveiliging/Camera's/Binnencamera's

SmartLife Camera voor Binnen

Wi-Fi | HD 720p | Pan tilt | Cloud Opslag (optioneel) / microSD (niet inbegrepen) | Met bewegingssensor | Nachtzicht | Grijs / Wit

Kenmerken

Artikelcode fabrikant: WIFICI20CGY
EAN-nummer: 5412810290109
• Smart IP Camera - reageert automatisch om elke beweging of elk geluid in uw kamer op te nemen
• HD-resolutie - voor kristalheldere beelden
• Eenvoudig rechtstreeks te verbinden met uw Wi-Fi-netwerk - geen aparte hub vereist
• Tweeweg communicatie - om personen in de kamer te horen en ermee te praten
• Muur- en plafondbevestiging bijgeleverd - direct uit de verpakking eenvoudig te monteren
• Volledig ondersteund door alle andere producten in het Nedis® SmartLife-assortiment.
Deze Nedis SmartHome IP Camera, een essentiële aanvulling op elk smarthome-systeem, beschikt over pan- en tilt-functionaliteit en kan zo de hele kamer bestrijken.
Deze draadloos bediende beveiligingscamera kunt u rechtstreeks aansluiten op uw Wi-Fi-netwerk thuis - geen extra hub vereist - en wordt geactiveerd door elke beweging en elk geluid in de ruimte.

Smart IP Camera
Woningautomatisering is een stuk eenvoudiger geworden. U kunt deze eenvoudig te gebruiken camera gemakkelijk verbinden met uw bestaande Wi-Fi-netwerk om ruimtes te controleren op geluid of beweging.
De camera neemt op in HD-resolutie (1280x720 pixels) en maakt compleet heldere beelden. Daarnaast is de camera 's nachts net zo krachtig: de nachtzichtmodus heeft een bereik van 10 meter.
De camera ondersteunt microSD-kaarten tot 128 GB (niet bijgeleverd) voor voldoende opslag van beelden en dankzij het stijlvolle en compacte design kunt u deze camera overal in uw ruimte plaatsen om een hoek van 110° graden op te nemen wanneer de 1/4” CMOS-sensor wordt geactiveerd.
Dankzij de pan- en tilt-functies kan de camera een groter oppervlak vastleggen wanneer u deze bedient met uw telefoon of tablet.

Over Nedis SmartLife
Ontdek een breed en steeds groeiend assortiment producten, zoals gloeilampen, schakelaars, contactdozen, sensoren en camera’s, die allemaal kunnen worden bediend met een eenvoudig te gebruiken en intuïtieve app.
Of u nu op zoek bent naar één slimme gloeilamp of camera, of uw hele huis wilt automatiseren, ontdek hoe toegankelijk smart technologie tegenwoordig is.

Verpakking

Inhoud verpakking

IP camera
Alternative coloured cover
USB cable
Power adapter
Camera mount
Adhesive pad
Quick start guide

Verpakkingsafmetingen Cadeaubox met eurolock

Breedte Hoogte Lengte
90 mm 95 mm 190 mm

Logistieke afmetingen

Verpakt per Breedte Hoogte Lengte Gewicht
1 190 mm 100 mm 95 mm 215 g
20 410 mm 215 mm 485 mm 8820 g

Productspecificaties

Breedte 63 mm
Hoogte 96 mm
Diepte 58 mm
Gewicht 215 g
Kleur Wit
Grijs
Ingebouwde microfoon Ja
Apparaat stroominput Micro-USB
Ingangsstroom 1.0 A
Stroomkabel zijde B Micro-USB
Stroomkabel zijde A USB
Materiaal Kunststof
Functionaliteit voor cloud opslag Ja
Geïntegreerde luidsprekers Ja
Maximale resolutie HD 720p
Megapixels 1 MPixel
Lens 4.0 mm
Lengte stroomkabel 2.00 m
Geschikt voor Nedis® SmartLife
Kijkhoek 110 °
Beeld Chip 1/3" CMOS
LED 1
Accessoires Camerabevestiging
AC-Adapter EU-Stekker
Zelfklevende Sticker
USB-Kabel
Ingangsvoltage 5 V DC
Stekkertype Euro
Maximale antenne versterking 3 dBi
Nachtzicht 10 m
Maximale stroomverbruik 4.5 W
Met bewegingssensor Ja
App beschikbaar voor Android™
IOS
Zendfrequentie 2400 - 2483.5 MHz
Maximaal zendvermogen 18.5 dBm
Type stroombron Netvoeding
Type opslag microSD (niet inbegrepen)
Cloud Opslag (optioneel)
Kiep en kantel Ja
Ondersteunde draadloze technologie Wi-Fi
Aantal producten in verpakking 1 Stuks
Bedrijfstemperatuurbereik 0 - 50 °C

Ondersteuning

Veelgestelde vragen

Nee, dit is op het moment nog niet mogelijk.

Nee, dit apparaat is niet compatible met Google/NEST Home hub.
De beelden zijn op dit moment niet te streamen naar een Google/NEST Hub.

Ja dat is mogelijk.

Ieder persoon dient een account aan te maken in de SmartLife app.
Om deze personen toe te voegen als familie volg dan onderstaande stappen:

Klik linksboven op de naam van uw huis in het hoofdscherm.
Selecteer beheer huis, klik opnieuw op de naam van uw huis.
Hier ziet u uw instellingen van uw huis zoals aantal kamers, lokatie ect.
Klik hier daaronder onder de kop Familieleden op "Leden toevoegen".
Dit geeft de persoon toegang tot al uw SmartLife producten.

Wilt u een persoon alleen toegang geven tot 1 bepaald product, ga naar instellingen van het bepaalde product en selecteer "Apparaat delen" klik op toevoegen.

Dit is waarschijnlijk een wifi probleem die verschillende oorzaken kan hebben:

1.) Wifi signaal is instabiel
2.) Wifi signaal is te zwak
3.) Using an access point with the same SSID and Password that do not support IEEE802.11R standaard.

Probleem 1 kan vaak opgelost worden door uw router te herstarten.

Probleem 2 kan worden opgelost door een met een app Wifi analyzer uw signaal te controleren en eventueel om van kanaal op uw router in te stellen.

Probleem 3 Dit kunt u controleren door acces points en versterkers uit te schakelen. Als de producten dan weer online komen dan zijn de acces points en versterkers een probleem. We raden u dan aan om een Mesh systeem te gebruiken die de IEE802.11R ondersteunen (wifi6)

Wij hebben voor u de volgende vragen gevonden in het Engels

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

You can add maximum 20 members.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.