Sikkerhet og sikkerhet/Kameraer/Innendørs kameras

SmartLife Innendørs kamera

Wi-Fi | HD 720p | Cloud Storage (valgfritt) / microSD (ikke inkludert) | Med bevegelses sensor | Nattsyn | Hvit

Egenskaper

Leverandør Delenummer: WIFICI05CWT
Strek nummer: 5412810290048
• smart IP-kamera - reagerer automatisk for å ta opp bevegelse eller lyd i rommet
• HD-oppløsning - for å ta opp krystallklare bilder
• enkel å koble direkte til WiFi-nettverket - trenger ikke et separat tilkoblingspunkt
• toveiskommunikasjon - til å høre og snakke med dem i rommet
• fullt støttet av alle andre produkter i Nedis® SmartLife-serien
Dette Nedis IP-kameraet for smarthjem er essensielt utstyr for alle smarthjem-systemer og kan kobles direkte til Wi-Fi-nettverket - uten et ekstra tilkoblingspunkt - og aktiveres av bevegelse og lyd i rommet.

Smart IP-kamera
Hjemmeautomatisering ble akkurat mye enklere. Dette brukervennlige kameraet kan enkelt kobles til det eksisterende WiFi-nettverket for å overvåke rom med tanke på lyd eller bevegelse.
Det registrerer i HD-oppløsning (1280 x 720 piksler) som gir bilder med fullstendig klarhet. I tillegg er kameraet like kraftig om natten med nattsynmodus som har en rekkevidde på 5,0 m.
Kameraet støtter microSD-kort på opptil 128 GB (ikke inkludert) som gir mye opptakslagring, og den fleksible, bøyelige designen betyr at det kan plasseres hvor som helst på rommet for å ta opp bilder med en visningsvinkel på 110° takket være CMOS-sensoren på 1/4 tomme.
En 3M selvklebende pute er inkludert for feste på veggene på rommet.

Om Nedis SmartLife
Oppdag et bredt og stadig større utvalg av produkter - som pærer, brytere, kontakter, sensorer og kameraer - som kan styres gjennom en brukervennlig og intuitiv app.
Enten du ser etter en enkel smart pære, et kamera eller ønsker å automatisere hele huset - oppdag hvor tilgjengelig smartteknologi er i dag.

Emballasje

Innholdet i pakken

IP camera
USB cable
Power adapter
Adhesive pad
Quick start guide

Forpaknings størrelse Gaveeske med eurolock

Bredde Høyde Lengde
67 mm 97 mm 140 mm

Logistikk størrelse

Antall/kartong Bredde Høyde Lengde Vekt
1 65 mm 95 mm 140 mm 187 g
40 330 mm 305 mm 405 mm 8200 g

Produktspesifikasjoner

Bredde 53 mm
Høyde 112 mm
Dybde 50 mm
Vekt 107 g
Farge Hvit
Innebygd mikrofon Ja
Enhetens inngangsforbindelse ® Micro USB
Input Current 1.0 A
Strømkabel side B Micro USB
Strømkabel side A USB
Strømkildetype Nettstrøm drevet
Materiale Plast
Cloud innspilling funksjonalitet Ja
Innebygget høytaler Ja
Maksimum oppløsning HD 720p
Nattsyn 5 m
Megapiksel 1 MPixel
Linse 4.0 mm
Strømkabel lengde 2.00 m
Kompatibel med Nedis® SmartLife
Betraktningsvinkel 110 °
Bildebrikke 1/3" CMOS
LED 1
Tilbehør AC-Adapter, Europaisk Plugg
Selvklebende pute
USB-Kabel
Inngangsspenning 5 V DC
Maksimum forbruk strøm 2.5 W
Nettplugg Euro
Maksimal antenneforsterkning for overføring 3 dBi
Maksimal overføringseffekt 14 dBm
Med bevegelses sensor Ja
App tilgjengelig for Android™
IOS
Send frekvensområdet 2400 - 2483.5 MHz
Støttet trådløs teknologi Wi-Fi
Driftstemperaturområde -20 - 50 °C
Antall produkter i pakken 1 stk.
Lagringstype microSD (ikke inkludert)
Cloud Storage (valgfritt)

Støtte

Vanlige spørsmål

Vi har funnet følgende spørsmål til deg på engelsk

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

No, it only works for the camera device you have subscribed it with.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

When you SD-Card or Memory is full, the oldest file will be overwritten.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.