Kabler og adaptree/Datamaskiner og nettverk/Zigbee Gateway

SmartLife Gateway

Zigbee 3.0 | 50 Enheter | Nettstrøm drevet | Android™ / IOS | Hvit

Egenskaper

Leverandør Delenummer: WIFIZB10CWT
Strek nummer: 5412810327898
• Plugg-inn-design for maksimal brukervennlighet
• Koble opp til 50 Zigbee-produkter til én enkelt gateway
• Zigbee støtter øyeblikkelig kommunikasjon med minimal batteribruk
• Integrer denne gatewayen i SmartLife-appen for å kombinere Nedis® Zigbee-produkter med ethvert SmartLife-produkt
Denne gatewayen kobler seg direkte til Wi-Fi-nettverket ditt, så du trenger ikke Ethernet-kabel. Bare installer den på Nedis SmartLife-appen din, så kan du koble til opp til 50 Nedis Zigbee-produkter fra én enkelt gateway.
Hver tilkoblede produkt vises i SmartLife-appen og kan inkluderes i automatiserte oppgaver som om det er koblet direkte til det trådløse nettverket.
Zigbee er en alternativ protokoll til Wi-Fi som gir betydelig lavere strømforbruk. Dette lar små, trådløse sensorer være funksjonelle i opp til flere år på ett enkelt batteri.

Emballasje

Innholdet i pakken

Zigbee-gateway
Brukerhåndbok

Forpaknings størrelse Gaveeske med eurolock

Bredde Høyde Lengde
60 mm 125 mm 105 mm

Logistikk størrelse

Antall/kartong Bredde Høyde Lengde Vekt
1 60 mm 155 mm 110 mm 108 g
40 340 mm 300 mm 440 mm 5040 g

Produktspesifikasjoner

Bredde 41 mm
Høyde 56 mm
Dybde 56 mm
Vekt 53 g
Farge Hvit
Strømkildetype Nettstrøm drevet
Materiale Plast
Kompatibel med Nedis® SmartLife
Maksimal overføringseffekt 18 dBm
Maksimal antenneforsterkning for overføring 1 dBi
App tilgjengelig for Android™
IOS
Send frekvensområdet 2400 - 2484 MHz
Enhetens inngangsforbindelse ® Euro
Antall produkter i pakken 1 stk.
Driftstemperaturområde -10 - 50 °C
Inngangsspenning 100 - 240 V AC
Input Current 0.01 A
Antall enheter 50 Enheter
Støttet trådløs teknologi Zigbee 3.0

Støtte

Vanlige spørsmål

Vi har funnet følgende spørsmål til deg på engelsk

It has a range up to 30 meters. (open field, no other signals)
The actual range in your home depends on walls, objects and other wireless signals present.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.