Kablar och adaptrar/Ström/Strömbrytare

SmartLife Strömbrytare

Wi-Fi | Enda | Väggfäste | 1000 W | Android™ / IOS | Glas | Vit

Egenskaper

Tillverkarens artikelnummer: WIFIWS10WT
Streckkod: 5412810271771
• Hållbar - med en livslängd på över 100 000 omkopplingscykler
• Diskret - smälter in i rummets inredning
• Kraftfull - gör att du kan schemalägga belysning, para ihop med andra apparater och enheter och styra med rösten (med Amazon Alexa eller Google Home)
• Mångsidig - kan användas lokalt som en traditionell väggströmbrytare för lampor, på distans eller automatiskt
Traditionella strömbrytare för lampor blev just ännu smartare. Med den här smarta väggströmbrytaren för lampor kan du fjärrstyra och automatiskt styra belysningen.

Enkel att installera
Strömbrytaren kan användas för att styra lampan genom att använda touchknappen på den. Men den gör också att du kan ansluta den direkt till din Wi-Fi-router och få kontroll över lampan från din smartphone, surfplatta eller med rösten, när den används tillsammans med Amazon Alexa eller Google Home.
Obs: Neutral tråd krävs för att alltid driva brytaren med 230 Volt

Schemalägg och para ihop
Med den intuitiva appen som är hjärnan bakom den här smarta väggströmbrytaren för lampor kan du para ihop den här lampan med andra apparater för att skapa den perfekta stämningen i rummet med ett enda kommando, eller ställa in lampan att tändas automatiskt - perfekt om du ska vara bortrest några dagar.

Diskret
Dess glasfront är snygg, lätt att rengöra och smälter in i inredningen, men den diskreta enheten är tillräckligt kraftfull för elektriska lampor på upp till 300 W.

Om Nedis SmartLife
Upptäck ett stort och ständigt växande sortiment av produkter - såsom lampor, brytare, uttag, sensorer och kameror - som alla kan styras med en lättanvänd och intuitiv app. Med röststyrningsfunktioner som stöds av Amazon Alexa och Google Home och utan behov av något annat än ditt befintliga Wi-Fi-nätverk är detta ett anslutet, smart hem på ett enkelt sätt.
Oavsett om du letar efter en enda smart lampa eller ett uttag, eller om du vill automatisera hela huset, kan du upptäcka hur lättillgänglig smart teknik är i dag.

Förpackning

Paketet innehåller

Smart väggkontakt
Snabbstartsguide

Storlek på förpackning Presentask med eurolock

Bredd Höjd Längd
50 mm 125 mm 105 mm

Förpackningsstorlek

Antal/kartong Bredd Höjd Längd Vikt
1 50 mm 150 mm 105 mm 175 g
50 280 mm 280 mm 550 mm 9400 g

Produktspecifikationer

Bredd 35 mm
Höjd 85 mm
Djup 85 mm
Vikt 124 g
Färg Vit
Indikatorlampa Ja
Typ av strömkälla Strömadapter
Kompatibel med Nedis® SmartLife
Maximal antennförstärkning 2 dBi
Ingångsström 10 A
Material Glas
Uteffekt 1000 W
App tillgänglig för Android™
IOS
Maximal sändningseffekt 19 dBm
Inre djup 26 mm
Hålavstånd monteringsplatta 60 mm
Montage Väggfäste
Enhetens utgångsanslutning Enda
Maximal ström konsumtion 0.3 W
Utström 4 A
Inspänning 100 - 240 V AC 50 Hz
Trådlös teknologi som stöds Wi-Fi
Antal varor i paketet 1 st.
Drifttemperaturens omfång -10 - 45 °C
Sänd frekvensområdet 2412 - 2462 MHz

Support

Vanliga frågor

Vi har hittat följande frågor åt dig på engelska

For this you need 2 wall switches.

1. replace 1 existing wall switch for a smart wall switch.

- When you do not have a neutral wire in the wall switch connection point:
1. Tape the existing switch wire (typically the black one) to a new switch wire and to a
new neutral wire.
2. Pull the old switch wire with the taped new wires to your
lamp connection point.
3. Connect the Neutral wire to the neutral wire that goes to your
lamp.

2. replace the other existing wall switch for a smart wall switch.

- replace the switch wire for a neutral wire by Taping the new neutral wire to your
existing switch wire.

3. Now you can make the automation.
Condition: if switch button1 is on
Task: switch button2 to on.

Do the same for off.

Condition: if switch button2 is on,
Task: switch button1 to on.

Do the same for off.

No, this is not a dimmer.
You can program the button(s) so it will set a Nedis Smartlife bulb to a certain brightness.
The brightness of regular lighs can't be changed, you can only turn it on or off with the app or voice assistants.

You need a neutral wire at your switch connection point.
So you need a blue , brown and black wire in your connection point.

If you have no blue wire (neutral) you have to make this.

We advise you to use the existing black wire, tape a blue and a new black wire to the existing black wire and pull the wires towards your lamp. Connect the new blue wire to the existing blue wire and reconnect the black wire.

Om de wifi slimme schakelaar te laten werken heeft u een neutraal nodig in de inbouwdoos. Dit zijn we in Nederland niet gewend.
Om dit snel en makkelijk op te lossen raden wij u aan, om aan de bestaande zwarte draad bij uw lamp of gordijn een nieuwe zwarte draad en nieuwe blauwe draad te plakken en deze via uw inbouwdoos door te trekken.

De nieuwe blauwe draad sluit u aan op de bestaande blauwe draad bij uw lamp aansluitpunt en op de "N" van uw slimme schakelaar.

You can add maximum 20 members.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.

1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.

Now, you can control your devices by Google home products.


Add the "Smart Life" service to Google Home (no Nedis in the name).

Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.

Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.