Cables and Adapters/Computer and Network/Zigbee Gateway

SmartLife Gateway

Zigbee 3.0 | 40 Devices | USB Powered | Android™ / IOS | White


Vendor Part Number: WIFIZB10WT
EAN number: 5412810327904
• Connect up to 40 Zigbee products to a single gateway
• Zigbee supports instant communication with minimal battery usage
• Integrate this gateway into the SmartLife app to combine Nedis® Zigbee products to any SmartLife product
This gateway will connect directly to Wi-Fi so no ethernet cable is required. Install it in the Nedis SmartLife application and connect up to 40 Nedis Zigbee products (ZBxxx) to a single gateway. Each connected product will appear in the Nedis SmartLife application and can be included in automations as if it is directly connected to Wi-Fi.

Zigbee is an alternative protocol to Wi-Fi with low power consumption as the main advantage. This enables small wireless sensors to remain functional up to multiple years on a single battery.


Package contents

Zigbee gateway
USB Cable

Retail package dimensions Giftbox with eurolock

Width Height Length
106 mm 150 mm 35 mm

Logistic dimensions

Packed per Width Height Length Weight
1 35 mm 150 mm 105 mm 132 g
4 115 mm 85 mm 260 mm 600 g
100 275 mm 430 mm 580 mm 15500 g

Product specifications

Width 62 mm
Height 15 mm
Depth 62 mm
Weight 58 g
Colour White
Device power input connection(s) Micro USB
Input current 1.0 A
Material Plastic
Power source type USB Powered
Compatible with Nedis® SmartLife
Input voltage 5 V DC
Maximum transmit antenna gain 1 dBi
App available for Android™
Transmit frequency range 2412 - 2472 MHz
Maximum transmit power 19 dBm
Number of Products in Package 1 pcs
Power adapter cable length 1 m
Number of devices 40 Devices
Supported wireless technology Zigbee 3.0
Operating temperature range -10 - 55 °C
SmartLife Yes


Frequently asked questions

It has a range up to 30 meters. (open field, no other signals)
The actual range in your home depends on walls, objects and other wireless signals present.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.