SmartLife Convection Heater
Wi-Fi | Suitable for bathroom | Glass Panel | 2000 W | 2 Heat Settings | LED | 15 - 35 °C | Adjustable thermostat | White
• Connects directly to your Wi-Fi so you can control it from anywhere in the world
• Simply set a timer or a schedule for automated heating
• Use the full 2000 W to quickly heat up the room - or lower the heating power to 1000 W for a more gentle heating.
• Overheat protection - for safe operation
• Remote control - for more operating convenience
• IP24 - splash water proof, safe to use in bathrooms
• Can be used stand alone or wall mounted
Use the touch buttons on the front - or operate it remotely through the Nedis SmartLife app - to set the temperature, heating power or set it on a timer or a schedule.
By combining the app with your favourite voice assistant (Google Home or Amazon Alexa) you can even control it using voice commands.
All of this is possible without the need of an additional hub or gateway.
Smart convection heater
2x set of caster wheels
3x wall screw
Quick start guide
Retail package dimensions Giftbox
|Power source type
|Maximum transmit antenna gain
|Power cable length
|Maximum transmit power
|App available for
|Transmit frequency range
2412 - 2472 MHz
Type F (CEE 7/7)
|Type of heater
|Maximum power consumption
|Fall over protection
|Suitable for bathroom
|Number of heat settings
2 Heat Settings
|Supported wireless technology
|Number of Products in Package
230 V AC
|Operating temperature range
15 - 35 °C
Frequently asked questions
How do i get the heater in pair mode?
The power switch at the right side must be on.
The display must be off.
hold the "+" button for 5 seconds till the white led will blink.
Now you can install the heater.
I want to control my Nedis SmartLife products with Google Assistant. But I can't control them.
To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.
1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.
Now, you can control your devices by Google home products.
How do i add Nedis SmartLife to Google Home?
Add the "Smart Life" service to Google Home (no Nedis in the name).
Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.
Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.
What is an automation?
An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
Maximum number of members that can be added to a family.
You can add maximum 20 members.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.