Lighting/Decorative Lighting/LED Lights
SmartLife LED Strip
Wi-Fi | Cool White / RGB / Warm White | SMD | 5.00 m | IP65 | 2700 - 6500 K | 960 lm | Android™ / IOS
SmartLife LED Strip
Wi-Fi | Cool White / RGB / Warm White | SMD | 5.00 m | IP65 | 2700 - 6500 K | 960 lm | Android™ / IOS
As this LED strip combines both RGB as well as warm and cool white LEDs, you can not only set any preferred colour, but also use it for warm to cool white indirect lighting
Its 5 metre length can be shortened or extended with similar LED strips for endless possibilities
The double sided adhesive (3M) is already placed for easy installation on any clean and flat surface.
Features
• Easy to set up - simply connect to your Wi-Fi to set, control and schedule this LED strip • Control the brightness and colour (RGB) or you can select a hue from warm to cool white to perfectly match your mood • The strip can be shortened or extended - for endless possibilities • Double sided adhesive (3M) already placed - for easy installation • Works as stand-alone smart light - or pair it with other SmartLife products to create an entire smart home
Package contents
RGBW LED strip (5 m)
Wi-Fi controller
Power supply
Quick start guide
Product specifications
| Maximum power consumption |
15 W |
|---|---|
| Maximum transmit antenna gain |
2.5 dBi |
| Compatible with |
Nedis® SmartLife |
| Wireless technology |
Wi-Fi |
| IP rating |
IP65 |
| Power adapter cable length |
1.50 m |
| Device power input connection(s) |
DC 5.5 x 2.1 mm |
| Maximum transmit power |
16 dBm |
| Input voltage |
230 V AC 50 Hz |
| Light colour |
Warm White Cool White RGB |
| Energy class |
A |
| App available for |
Android™ IOS |
| Power plug |
Euro (CEE 7/16) |
| Rated life time of lamp |
20000 h |
| Cuttable |
Yes |
| Energy consumption per 1000 hours |
15 kWh |
| LED module |
5050 |
| Mount |
Surface Mounted |
| Material |
Silicone |
| Extendable light strip |
Yes |
| Transmit frequency range |
2412 - 2484 MHz |
| Colour temperature |
2700 - 6500 K |
| Rated luminous flux |
960 lm |
| Theme |
Children |
| Colour |
Multi Colour |
| Number of LEDs per meter |
90 |
| Cord length |
5.00 m |
| LED Type |
SMD |
Display all products in:
Lighting » Decorative Lighting » LED Lights
Smart Home » Lighting » LED Strips
Lighting » Decorative Lighting » LED Lights
Smart Home » Lighting » LED Strips
Frequently asked questions
Can the strip light up in multiple colours at the same time?
No, the LED's are not individually addressable.
My LED strip does not want to install with the EZ mode installation.
Please try the AP mode.
Make sure that you use a 2.4Ghz wifi network.
Reset the controller so the LED strip blinks slow. (press and hold the button on the controller)
If it blinks fast, reset it again and it will blink slowly
In the app:
+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.
Hold your phone very close to the plug during the installation
This method uses a direct connection to the device to send the info of your wifi to it.
Holding it close optimises this connection
Make sure that you use a 2.4Ghz wifi network.
Reset the controller so the LED strip blinks slow. (press and hold the button on the controller)
If it blinks fast, reset it again and it will blink slowly
In the app:
+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.
Hold your phone very close to the plug during the installation
This method uses a direct connection to the device to send the info of your wifi to it.
Holding it close optimises this connection
Can I just take the adhesive strip off?
Ensure that you only take off the plastic protection and not the entire adhesive strip.
If you remove the whole strip, you will not be able to stick it to anything.
If you remove the whole strip, you will not be able to stick it to anything.
Can I extend the strip?
Yes, you can purchase another set and plug the second strip in the first one.
If you extend it to 10m (5m extra) then you might see some loss in brightness at the end of the second strip.
We recommend you install multiple complete sets and group them in the app.
Now you can control all of the strips as if they are a single strip without any loss in brightness.
If you extend it to 10m (5m extra) then you might see some loss in brightness at the end of the second strip.
We recommend you install multiple complete sets and group them in the app.
Now you can control all of the strips as if they are a single strip without any loss in brightness.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal meber or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal meber or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.
Need help with this product?
Manual Energy label Datasheet Datasheet Sales sheet Sales sheet Quality documentsPlease contact our support team for an answer to your question.
Get in touch