Security & Safety/IP Security/Indoor
SmartLife Indoor Camera
Wi-Fi | Full HD 1080p | Cloud / microSD | Night vision | Android™ / IOS | White
SmartLife Indoor Camera
Wi-Fi | Full HD 1080p | Cloud / microSD | Night vision | Android™ / IOS | White
HD Resolution
You can keep an eye and react to everything you see in real time via the app. Thanks to the micro SD slot, you can store recordings on a micro SD card up to 128 GB. It records in Full HD resolution (1920x1080 pixels) for complete clarity of the images captured. There is also an optional possibility to save the video material in our app via a cloud solution..
Reacts to movement and sound
The camera reacts to movements. So when someone passes the Wi-Fi camera, it will react. It will start automatically a recording and next to that you will receive a push notification on your smartphone. The camera also reacts to sounds. You can select between two sensitivity levels (High 65 dB, Low 85 dB). The sounds are not recorded, but you can choose to receive a push notification if or when audio is detected. The notifications are displayed as popup messages on your smartphone without you having to open the app. This means you are informed immediately and can respond very quickly. The sound sensitivity levels have been set up such that a normal conversation or normal operating noises do not trigger a camera reaction.
Two-way communication
The Wi-Fi camera is equipped with a microphone and loudspeaker. The two-way audio communication works perfectly as a baby monitor. You can watch your baby while it is sleeping, but you will also be notified as soon as it cries - so you can speak to the baby right away before you go to the cot. The additional climate sensor of this unit can also be used to monitor the ambient temperature and humidity in the room.
The camera can also be used it to watch a young puppy pet specially since it has a viewing angle of 100°.
Easy to set-up
The Wi-Fi camera can be installed without a gateway and integrated directly into your wireless network – this simplifies installation and saves additional costs. The camera receives power via the micro-USB port and the included power supply unit. Therefore, you can set up the Wi-Fi camera anywhere where there is a power socket. A 3M adhesive pad is included for fixing to the walls of your room.
About Nedis® SmartLife
Nedis SmartLife Wi-Fi products are easy to install and will be integrated directly into your own Wi-Fi network. Since you don’t need a gateway or hub - it saves you additional costs. Discover a wide and ever-expanding range of products - such as bulbs, switches, sockets, sensors, and cameras - that can all be controlled through an easy-to-use and intuitive app. Whether you're looking for a single smart bulb or socket, or you want to automate your entire house, discover how accessible smart technology is today.
Features
• Smart IP Indoor Camera - responds automatically to record any motion or sound in your room • Easy to connect directly into your Wi-Fi network - no separate hub required • Ideal for mobile monitoring of home, pets, babies, etc. • Motion and sound detection, both with adjustable sensitivity • Two-way communication - to hear and speak to those in the room • Full HD resolution - for crystal-clear footage capture • Night vision function offering a range of 5.0 m. • Can be used as a Baby Monitor or to watch young pets • Additional climate sensor to monitor the ambient temperature and humidity in the room • Ideal if you have to take care of dependent parents • Storage of video recordings thanks to a microSD card slot (up to 128 GB) • Video storage via cloud possible (subscription based) • Supports ONVIF (Open Network Video Interface Forum) to display in browser • Multi-user function so several people can access the camera at the same time • Fully supported by all other products in the Nedis® SmartLife range
Package contents
IP Camera
Climate Sensor
USB Cable
Power Adapter (EU)
Camera Mount
Quick Start Guide
Product specifications
| Colour |
White |
|---|---|
| Built-in microphone |
Yes |
| Device power input connection(s) |
Micro USB |
| Power cable side B |
Micro USB |
| Power cable side A |
USB |
| Power source type |
Mains Powered |
| Material |
Plastic |
| Cloud Recording Functionality |
Yes |
| LED |
1 |
| Integrated speakers |
Yes |
| Maximum transmit power |
10 dBm |
| Night vision |
5 m |
| Maximum transmit antenna gain |
2.5 dBi |
| Lens |
4.0 mm |
| Power cable length |
2.00 m |
| Compatible with |
Nedis® SmartLife |
| Viewing angle |
110 ° |
| Image chip |
1/3" CMOS |
| Accessories |
Camera Mount AC Adapter EU Plug Self-Adhesive Pad USB-Cable Climate Sensor |
| Input voltage |
5 V DC |
| Storage type |
microSD Cloud |
| Input current |
1 A |
| Maximum power consumption |
2.5 W |
| Power plug |
Euro |
| Wireless technology |
Wi-Fi |
| Operating temperature |
-20 - 50 °C |
| Maximum resolution |
Full HD 1080p |
| Megapixel |
2 MPixel |
| App available for |
Android™ IOS |
| Transmit frequency range |
2400 - 2483.5 MHz |
Display all products in:
Security & Safety » IP Security » Indoor
Smart Home » Cameras » Indoor Cameras
Security & Safety » IP Security » Indoor
Smart Home » Cameras » Indoor Cameras
Frequently asked questions
The Smart installation method does not seem to work, how do I install it?
In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.
If I subscribe to the cloud service in the VAS menu, does a single subscription work for all my Smartlife camera devices?
No, it only works for the camera device you have subscribed it with.
The SD-card is not working at the camera.
Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.
Does the camera support cloud storage?
Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.
Can I stream the livefeed of the camera to a pc?
No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.
I get an error that my password or SSID is too long.
You can bypass this error message.
- Click on OK and go on with the installation and follow the instructions.
Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.
If the QR-code can't be scanned, you can use the SmartConfig mode.
tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.
- Click on OK and go on with the installation and follow the instructions.
Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.
If the QR-code can't be scanned, you can use the SmartConfig mode.
tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.
What will happen if my SD-Card / Memory is full?
When you SD-Card or Memory is full, the oldest file will be overwritten.
The camera does not recognise the QR code
Please try the EZ mode installation
Reset the camera by holding down the reset button until you hear the sound
Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation
Reset the camera by holding down the reset button until you hear the sound
Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation
When I enter the IP address of this camera I see a login screen. How do I log in?
Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.
We are looking to add this functionality in the future.
Does it work with Google Home (HUB)?
No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.
The videostream is at moment not working with Google/NEST Hub.
How many camera's can I use with the VAS Cloud service?
This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.
Each individual camera will need it's own subscription.
Maximum number of members that can be added to a family.
You can add maximum 20 members.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal meber or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal meber or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.
Were these Frequently asked questions helpful?
/
What can we improve?
Need help with this product?
Manual Manual Datasheet Datasheet Sales sheet Sales sheet Quality documentsPlease contact our support team for an answer to your question.
Get in touch