Security & Safety/Smart Home/Observation

WiFi Smart IP Camera | Pan/Tilt | Full HD 1080p | Outdoor | Waterproof

Brand: Nedis Article number: WIFICO20CWT EAN number: 5412810290062

WiFi Smart IP Camera | Pan/Tilt | Full HD 1080p | Outdoor | Waterproof

Vendor Part Number: WIFICO20CWT
EAN number: 5412810290062
Home automation just got simpler. This easy to use Smart Outdoor IP Camera can be simply connected to your existing Wi-Fi network to monitor the outside areas of your house and record any sound or motion.

Full HD Resolution
It records in Full HD resolution (1920x1080 pixels) for complete clarity of the images captured. In addition, the camera is just as powerful at night: with its night vision mode offering a range of 15.0 m.

Waterproof
Fully contained in an ultra-resilient waterproof housing, this IP camera has a generous internal memory of 16 GB.

Crystal-clear
Recording Full HD videos and images at 1920x1080 pixels by its 1/3” CMOS sensor for a crystal-clear resolution, the camera is triggered when sounds or motion are detected.

Two-way communication
It is possible to communicate via the camera as two-way speaking and listening is enabled – meaning it can be used in a similar way to a telephone when people are in range.

Easy set up
A camera mount is supplied with the unit and its quick start guide ensures you can have it installed in no time at all.

About Nedis® SmartLife
Discover a wide and ever-expanding range of products - such as bulbs, switches, sockets, sensors, and cameras – that can all be controlled through an easy-to-use and intuitive app.
Whether you're looking for a single smart bulb or socket, or you want to automate your entire house, discover how accessible smart technology is today.
Features

Small friendly design 16 GB internal memory Pan/tilt functionality to cover a large area Wall- / Ceiling mount included

Package contents

IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide

Product specifications

Colour White
Power plug Euro / Type C (CEE 7/16)
IP rating IP65
Material Plastic
Maximum resolution 1080P
Accessories Camera Mount
AC Adapter EU Plug
Night vision 15 m
Operating temperature -20 - 50 °C
Wireless technology Wi-Fi
App available for Android™ & iOS
Interface DC
Megapixel 2 MPixel
Feature 2-Way Audio
Night Vision
Motion Sensor
Pan Tilt Zoom
Image chip 1/3" CMOS
Antenna gain 3 dBi
LED 1
Frequency range 2400 - 2483.5 MHz
Input voltage 12 VDC
Viewing angle 110 °
Maximum radio transmit power 18.5 dBm
Compatible with Nedis® SmartLife
Lens 2.8 mm
Storage type Internal 16GB

Frequently asked questions

The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.

You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.
It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.

See for instructions the FAQ "Does the camera support cloud storage?"
You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.
Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.
When you SD-Card or Memory is full, the oldest file will be overwritten.
No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.
An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.
No, unfortunately this is not possible at the moment.
Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.
No, it only works for the camera device you have subscribed it with.
In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal meber or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

Need help with this product?

Datasheet Manual Manual Quality documents

Please contact our support team for an answer to your question.

Get in touch

You may be also interested in these product(s)