Home & Living/Climate/Heaters

SmartLife Fan Heater

Wi-Fi | Tower | 2000 W | 3 Heat Settings | Oscillation | Display | 15 - 35 °C | Android™ / IOS | Black

Brand: Nedis Article number: WIFIFNH10CBK EAN number: 5412810314461

SmartLife Fan Heater

Wi-Fi | Tower | 2000 W | 3 Heat Settings | Oscillation | Display | 15 - 35 °C | Android™ / IOS | Black

Vendor Part Number: WIFIFNH10CBK
EAN number: 5412810314461
This elegant and slim Nedis® Smart Wi-Fi Fan Heater and Cooling can be used wherever heat is needed as quickly as possible. The low weight and the practical design of the device make it possible to change the location quickly and easily. This makes it ideal for small living rooms, bedrooms but also home office rooms.

The fan heater can be operated by using the physical buttons on top - or remotely through the Nedis SmartLife app. The heater has two heating levels and uses the full 2000 Watt to quickly heat up the room - and when approaching the target temperature it automatically lowers the heating power to 1200 Watt. In conjunction with one of the two heat settings, the thermostat allows precise air heating between 15 and 35°C, at personal discretion. In order to quickly reach the desired temperature at all points in the room, an oscillation function can be switched on manually or in the app, which ensures optimum distribution of the warm air.

In the Nedis SmartLife app tt is also possible to set a timer or a schedule. Like this you can start your day in a warmed-up room. Next to that you can also control the heater by voice control by Google Home or Amazon Alexa.

In order to ensure the safety the fan heater not only has overheating protection, but also has a toggle-off switch integrated in the bottom of the device, which immediately switches off the device when the heater falls over.

The Wi-Fi smart fan heater can be used on its own or in combination with your other Nedis SmartLife devices.

• Slim and elegant Smart Wi-Fi Fan heater can be used on its own or with the Nedis SmartLife app • Connects it directly to your Wi-Fi and control it from anywhere you want • Set temperature using buttons on top or in the Nedis® SmartLife app • Activate the horizontal pan for optimized air flow throughout the room • Simply set a timer or a schedule for automated heating • Two heat settings (1200 / 2000 watt) • Thermostat setting (on display and in app): 15 - 35 °C (1 °C steps) • Suitable for rooms up to 24 m² / 60 m³ • Can also be used as a fan in the summer • Small footprint of only ø 19 cm and a height of 57 cm • Overheating protection and falls-over protection • Easy to transport and operate

Package contents

Smart fan heater
Quick start guide

Product specifications

Colour Black
Power source type Mains Powered
Material Plastic
Power plug Type C (CEE 7/17)
Compatible with Nedis® SmartLife
Wireless technology Wi-Fi
Maximum transmit antenna gain 3 dBi
Type of fan Stand Fan
Oscillation Yes
App available for Android™
Power cable length 1.70 m
Display Yes
Transmit frequency range 2412 - 2472 MHz
Maximum transmit power 20 dBm
Overheating protection Yes
Maximum power consumption 2000 W
Overheat protection Yes
Timer function Yes
Fall over protection Yes
Model Tower
Timer Yes
Fan design Tower
Input current 8.7 A
Number of heat settings 3 Heat Settings
Operating temperature 15 - 35 °C
Power 1200 / 2000 W
Theme Winter
Input voltage 230 V AC

Frequently asked questions

To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.

1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.

Now, you can control your devices by Google home products.

Add the "Smart Life" service to Google Home (no Nedis in the name).

Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.

Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
You can add maximum 20 members.
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal meber or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

Need help with this product?

Online manual Manual Datasheet Datasheet Sales sheet Sales sheet Quality documents

Please contact our support team for an answer to your question.

Get in touch