Bluetooth® / Zigbee 3.0 | 40 Devices | USB Powered | Android™ / IOS | White
• Zigbee supports instant communication with minimal battery usage
• Integrate this gateway into the SmartLife app to combine Nedis® Zigbee products to any SmartLife product
Zigbee is an alternative protocol to Wi-Fi with low power consumption as the main advantage. This enables small wireless sensors to remain functional up to multiple years on a single battery.
Retail package dimensions Giftbox with eurolock
|106 mm||150 mm||35 mm|
|1||35 mm||150 mm||105 mm||132 g|
|4||115 mm||85 mm||260 mm||600 g|
|100||275 mm||430 mm||580 mm||15600 g|
|Supported wireless technology||
|Device power input connection(s)||
|Power source type||
5 V DC
|Maximum transmit antenna gain||
|App available for||
|Transmit frequency range||
2412 - 2472 MHz
|Maximum transmit power||
|Number of Products in Package||
|Power adapter cable length||
|Number of devices||
|Operating temperature range||
-10 - 55 °C
Frequently asked questions
What is the range of Zigbee?
It has a range up to 30 meters. (open field, no other signals)
The actual range in your home depends on walls, objects and other wireless signals present.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.